Vices
BV-01 (A) Bench Vice Fixed Base, (B) Bench Vice Swivel Base
The body and movable bar are made of high quality iron. Jaws made of special steel. Hardened and ground. An anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane and fix it in the required position with clamping screws.
Available Sizes-3", 4", 5", 6" & 8".
BV-03 Bench Vice Chinese Type
(A) Bench Vice Fixed Base Chinese Type
(B) Bench Vice Swivel Base Chinese Type
The body and movable bar are made of high quality iron. Jaws made of special steel. Hardened and ground. An anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane and fix it in the required position with clamping screws.
Available Sizes-3", 4", 5", 6" & 8".
BV-04 Industrial Bench Vice
(A) Industrial Bench Vice Fixed Base
(B) Industrial Bench Vice Swivel Base
The body and movable bar are made of high quality iron. Jaws made of special steel. Hardened and ground. An anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane and fix it in the required position with clamping screws.
Available Sizes-3", 4", 5", 6" & 8".
BV-05 Multipurpose Bench Vice
This truly versatile multi vice is ideal for use by both mechanics and engineers. Manufactured from high quality grey iron casting. Hardened steel jaws. Parallel serrated jaws, pipe jaws and V-jaws for holding both round & flat stock. Vice head rotates 360 degree with locking at any position. Body rotates 360 degree on grooved swivel base and has two lockdowns to lock at any position. Large built-in anvil. Sizes: 4", 5" & 6".
BV-06 All Steel Bench Vice
(A) All Steel Bench Vice Fixed Base
(B) All Steel Bench Vice Swivel Base (1)
The body and movable bar are made of high quality iron. Jaws made special steel. Hardened and ground. An anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane and fix it in the required position with clamping screws.
Available Sizes-3", 4", 5", 6" & 8".
BV-07 Bench Vice
Made of Ductile iron. Equipped with a locking swivel base to help you get the best angle on your work. The large anvil is perfect for shaping and fabrication work.
Constructed of Ductile Iron (SG Iron) Replaceable hardened forged steel jaws 360 degree swivel base locks in place.
Available in Cast Iron & Ductile Iron
Available in Fixed & Swivel Base
Sizes Available - 3", 4", 5", 6" & 8"
BV-08 Bench Vice Light Duty Model
The Body & movable are made up of high quality Iron. Jaws are made of special steel. Hardened & Ground. An Anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane & fix it in the requires position with clamping screws.
Available In Cast Iron & Ductile Iron
Available in Fixed & Swivel Base
Sizes Available - 3", 4", 5", 6" & 8"
BV-09 Bench Vice Combo with Anvil & Pipe Jaws
Designed differently than conventional style vices, Combination Anvil and Bench Vise features a horn, Anvil and hardy hole. This Vice also has Pipe Jaws.
Made up of high quality Ductile Iron. This vice is available in Fixed Base only.
Sizes Available - 100mm & 150mm
BV-10 Cylindrical Bench Vice
The Body & movable are made up of high quality Iron. Jaws are made of special steel. Hardened & Ground. An Anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane & fix it in the requires position with clamping screws.
Sizes Available - 80mm, 100mm & 150mm
BV-11 Bench Vice Tapered Fixed Base
This Bench Vice is made up of Ductile Iron. Pipes, round steel or other rounded workpieces can be securely clamped horizontally using the pipe clamping jaws under the clamping jaws. The guides on the movable jaw can be adjusted using screws.
Sizes Available - 4", 5", 6" & 8"
BV-12 Industrial Bench Vice Double Ribbed
The Body & movable are made up of high quality Iron. Jaws are made of special steel. Hardened & Ground. An Anvil on the vice housing provides the ability to perform small locksmith work. The swivel base allows you to move the vice body into a horizontal plane & fix it in the requires position with clamping screws.
Available in Fixed & Swivel Base
Sizes Available - 3", 4", 5", 6" & 8"
BV-13 Homeshop Bench Vice/ Utility Bench Vice
Securing workpieces to a work surface or workbench requires the right tools. This vise is a reliable accessory for completely securing metal and wooden workpieces, so that you can work on them more accurately and safely. The base of the vice consists of a metal disc with holes. These serve to push through bolts, so that the device is firmly attached to the bench or table. You manually adjust the position and tension of the two clamps on the vise by means of a double-head lever. You can also slide this to the left and right without any problems, so that you put sufficient leverage in every position. The jaws of the vise consist of a horizontal plate with ridges on it. That way you have a lot of control over the object to be edited. As a result, it does not just shift during treatment. The vice consists of high-quality steel and looks professional.
Sizes Available - 3.5" & 4.5"
BV-14 Bench Vice With Tail
Vice made of SG iron and with knurled jaws of hardened steel.
Vice is equipped with a turntable, built-in pipe jaws and mounting holes for bench mounting. The construction is very durable, which means that you will enjoy the vice for many years to come.
Available in swivel base only.
Sizes Available - 4", 5", 6" & 8"
WV-01 Woodworking Vice / Carpenter Vice 150mm
This joiners vise has a cast iron frame with chrome plated screw handle and alignment bars.
The cabinetmaker vice can be mounted on any workbench, can be mounted on top and bottom of the workbench for light clamping work. Maximum Opening-125mm
Weight-2.6 kgs
WV-02 Woodworking Vice / Carpenter Vice 150mm with Clamp
Due to the low weight (approx. 3 kg) and screw clamp attachment (clamping table thickness up to approx. 50 mm), you can use it in a versatile and flexible manner on work tables and workbenches. Can be used wherever you need a holding and clamping aid.
Made from sturdy cast iron
Jaw width 150mm
Get in touch with us for your requirements
© 2022 JSW Tools & Forgings. All Rights Reserved























